Foldable Drape Support (Crossbar)

This Drape Support is designed with portability in-mind.  It folds into three compact pieces, held together by a bungee cord, that makes it the perfect Drape Support to throw and your car and go!  This pairs nicely with our Break-Apart Upright and Cross Base to complete your set up using all compact components.

This is a part of our durable Premier Drape Support Line.  Similar to a tent pole, these three pieces snap together to get you to your fixed length. This is a three piece telescoping rods breaks down to as small as 38″ and is available in 8′ or 10′ fixed lengths.

The Georgia Expo Difference

• Steel hook ends, cast in aluminum, held into place with two rivets on each each
• Steel ring located at edge of the pipe prevent jamming if draped by absorbing the load
• High-Strength, anodized aluminum
• Industrial Strength Bungee connection and simple snap together design
• Punched, cut and riveted in our factory, ask us if you need customization to any of our standard size

Dimensions

• 8′ Drape Support – 94.5″L, 1.5″ diam, folds to collapsed length of 38″
• 10′ Drape Support – 118.5″L, 1.5″ diam, folds to collapsed length of 46″

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov
Disclaimer: Pipe and Drape should never be used where tip-over could cause harm or damage.