America's Largest Manufacturer of Exhibit Pipe & Drape!
|
America's Largest Manufacturer of Exhibit Pipe & Drape!
|
|
|
The Traditional Trade Show Booth: Traditional Trade Show Booths are 10 Ft. x
10 Ft. with 8 Ft. high back walls and 3 Ft. high side walls.
There are two
Note: Tip Over of Pipe & Drape may cause injury. When using Pipe & Drape it is extremely important to make sure your design is stable. Under certain circumstances using bases alone may not provide enough stability and you may need to add extra weight to the base or other means of support to prevent tip over. Storage Carts:
To compliment your trade show booths Georgia Expo manufactures a full line of Table Skirts, Storage Carts, Easels and Stanchions & Roping.
While multiple booths placed side by side or back to back will use common back and side walls. One free standing 10 Ft. x 10 Ft. trade show booth will use the following components. If you need assistance determining the correct amount of equipment you require contact a Georgia Expo Sales Representative.
|
|
|
basic systems that are commonly used for trade show booths, Slip Fit or Screw
In. Each is linked below describing their features. Convention
Drapes made from Banjo Cloth or Poly Premier in a wide range of colors
create the exact look you wish to achieve. Both fabrics have been engineered to
be flame resistant, durable & cost effective. Banjo Cloth, an open weave,
100% polyester fabric, has been the standard convention fabric for many years
and the one most people are familiar. Poly Premier is often
substituted as a more upscale 100% polyester, knitted fabric that has the look
of fine linen. Both are available as Convention Drapes and Table Skirts.
Every Georgia Expo fabric has been designed to pass the NFPA 701 revision 2004
and California Small Scale Flame Resistance tests and each has been registered
with the State of California which is generally recognized as the national
standard. A California flame certificate is included with every order.